Response Device
*** FOR CUSTOM ORDERS, PLEASE PURCHASE THE DEVICE AND CONTACT US WITH A FULL DESCRIPTION OF HOW YOU’D LIKE IT TO BE CUSTOMIZED***
***Our new design of the Response Device now will speak yes or no, depending on the corresponding motion sensor that gets triggered. A red LED light will turn on once the switch is turned to the “on” position to indicate the device is on.***
The Response Device is meant to be used with closed-ended questions. That is, questions with only 2 possible answers. You can ask the entity to move one side for one answer and the other for another answer.
There are 2 motion sensors, 1 on each side of the device. These sensors provide quick and precise measurements of movement up to 10 feet from the device. Depending on the detection of movement on either side of the device, a voice will then be triggered “yes” or “no”. This device was tested in total darkness, and we were still able to get a trigger on each side, even at 10 feet away!
Examples of closed-ended responses:
Yes / No
Male / Female
Boy / Girl
Hot / Cold
Light / Dark
Up / Down
Go / Stay
Just like the Rem Devices, our Response Devices are customizable to your liking. They are hand-customized. It uses 3 AA batteries to operate (included).
***It should be noted that all of our products are hand-customized. We do not use a 3D printer or any other machine to create our devices. We will create your device to the best of our ability to get it as close as we can to what you’re looking for***
*** FOR CUSTOM ORDERS, PLEASE PURCHASE THE DEVICE AND CONTACT US WITH A FULL DESCRIPTION OF HOW YOU’D LIKE IT TO BE CUSTOMIZED***
***Our new design of the Response Device now will speak yes or no, depending on the corresponding motion sensor that gets triggered. A red LED light will turn on once the switch is turned to the “on” position to indicate the device is on.***
The Response Device is meant to be used with closed-ended questions. That is, questions with only 2 possible answers. You can ask the entity to move one side for one answer and the other for another answer.
There are 2 motion sensors, 1 on each side of the device. These sensors provide quick and precise measurements of movement up to 10 feet from the device. Depending on the detection of movement on either side of the device, a voice will then be triggered “yes” or “no”. This device was tested in total darkness, and we were still able to get a trigger on each side, even at 10 feet away!
Examples of closed-ended responses:
Yes / No
Male / Female
Boy / Girl
Hot / Cold
Light / Dark
Up / Down
Go / Stay
Just like the Rem Devices, our Response Devices are customizable to your liking. They are hand-customized. It uses 3 AA batteries to operate (included).
***It should be noted that all of our products are hand-customized. We do not use a 3D printer or any other machine to create our devices. We will create your device to the best of our ability to get it as close as we can to what you’re looking for***
*** FOR CUSTOM ORDERS, PLEASE PURCHASE THE DEVICE AND CONTACT US WITH A FULL DESCRIPTION OF HOW YOU’D LIKE IT TO BE CUSTOMIZED***
***Our new design of the Response Device now will speak yes or no, depending on the corresponding motion sensor that gets triggered. A red LED light will turn on once the switch is turned to the “on” position to indicate the device is on.***
The Response Device is meant to be used with closed-ended questions. That is, questions with only 2 possible answers. You can ask the entity to move one side for one answer and the other for another answer.
There are 2 motion sensors, 1 on each side of the device. These sensors provide quick and precise measurements of movement up to 10 feet from the device. Depending on the detection of movement on either side of the device, a voice will then be triggered “yes” or “no”. This device was tested in total darkness, and we were still able to get a trigger on each side, even at 10 feet away!
Examples of closed-ended responses:
Yes / No
Male / Female
Boy / Girl
Hot / Cold
Light / Dark
Up / Down
Go / Stay
Just like the Rem Devices, our Response Devices are customizable to your liking. They are hand-customized. It uses 3 AA batteries to operate (included).
***It should be noted that all of our products are hand-customized. We do not use a 3D printer or any other machine to create our devices. We will create your device to the best of our ability to get it as close as we can to what you’re looking for***